PREMIUM WEEKLY LONG QUIZ: ONLINE SELF-REVIEW PROGRAM

#1. Plug valve

#2. Gas cock, gas stop

#3. Ball valve

#4. HAWK HEAVY DUTY SELF-ADJUSTMENT PIPE WRENCH

#5. RACHET CUTTER

#6. Which section of the plumbing code discusses the proper connections required for plumbing fixtures, drains, appurtenances, and appliances used to receive or discharge liquid wastes or sewage?

Section 301

Section 302

Section 303

Section 304

#7. What is the minimum distance required between a water closet or bidet and any side wall or obstruction?

0.1 meter

0.2 meter

0.3 meter

0.4 meter

#8. According to Section 309, what is the main requirement for the location of piping, fixtures, or equipment?

They should not interfere with the normal function or use of windows or doors

They should not interfere with the normal operation and use of required facilities

They should be located in a way that maximizes the use of space

They should be located in a way that is aesthetically pleasing

#9. Check valve

#10. According to Section 310.2, what is the penalty for concealing cracks, holes, or other imperfections in materials?

A fine

Imprisonment

Revocation of the plumbing license

None of the above

#11. Which fixtures require approved strainers according to Section 404?

Water closets and siphon action washdown or blowout urinals

All plumbing fixtures other than water closets and siphon action washdown or blowout urinals

Fixtures with slip joint connections

Fixtures connected to food waste disposal units

#12. What is the requirement for overflow outlets in fixtures?

The waste should be arranged so that standing water inside the fixture can rise inside the overflow way when the stopper is closed.

The overflow pipe should be connected to the outlet side of the fixture trap.

The overflow pipe should be connected to the house or inlet side of the fixture trap.

Water closet or urinal flush tanks can be connected to any part of the drainage system.

#13. What is the minimum dimension required for an access panel or utility providing access to concealed slip joint connections according to Section 404?

0.1 meter

0.2 meter

0.3 meter

0.4 meter

#14. According to Section 307, how should wastes detrimental to the public sewer system be disposed of?

Buried in a landfill

Treated and disposed of as necessary and directed by the Administrative Authority or other authorities having jurisdiction

Dumped in a nearby waterway

None of the above

#15. What is required for every building where plumbing fixtures are installed according to Section 305?

A septic tank

A public sewer system

A private sewer system

A sewer service connection to a public or private sewer system

#16. What is the purpose of Section 406.1?

To prohibit the use of unapproved water closets

To require the use of backflow prevention devices in ornamental and lily ponds, aquaria, and ornamental fountain basins connected to potable water supply lines

To regulate the installation of sheet metal lined wooden bathtubs

To establish minimum diameter requirements for waste and overflow connections in plumbing fixtures

#17. Globe valve

#18. According to Section 306, what is unlawful to deposit into any plumbing fixture, floor drain, interceptor, sump, receptacle, or device connected to the excreta and storm drainage systems, public sewer, private sewer, septic tank, or cesspool?

Ashes and cinders

Flammable and explosive liquids or gases

Oils and greases

All of the above

#19. Which material can be used for exposed or accessible connections of continuous waste and fixture tailpiece according to Section 404?

Copper

Seamless drawn brass not less than Gauge No. 20 B&S or 0.8 mm in thickness

Plastic

Iron

#20. Which fixtures are prohibited according to Section 405?

Water closets with invisible seats or unventilated space or having walls not thoroughly washed out at each discharge

Trough urinals

Drinking fountains installed inside public toilet rooms

All of the above

#21. WIDE ROLL PIPE CUTTER

#22. What material can be used for tailpiece, continuous waste, or waste and overflow when they are exposed or accessible?

Copper

Brass

PVC

Steel

#23. What type of water closet bowls should be used for public use?

Round bowl types

Elongated bowl types equipped with open-front seats

Elongated bowl types equipped with closed-front seats

Oval bowl types

#24. What is the main restriction on the location of excreta plumbing, building sewer, and other facilities according to Section 308.1?

They can only be located on the same lot as the building or premises being served

They can be located on any lot as long as they are connected to the public sewer system

They can be located on any lot as long as they are not deleterious to the environment

They can only be located on public property

#25. What type of water closets shall be prohibited?

Those with invisible seats or unventilated space

Those having walls, which are not thoroughly washed out at each discharge

Those that permit siphonage of the contents of the bowl back into the water tank

All of the above

#26. CROWFOOT’S WRENCH

#27. According to Section 301 of the plumbing code, which of the following is true?

Sewage can be disposed of in any manner

Wastewater can only be disposed of through an approved Excreta and Storm Drainage System

Human excrement can only be disposed of in a public sewer system

Sewage can be disposed of through any drainage system

#28. According to Section 311.1, which of the following fittings is not allowed as a drainage fitting?

Single or double hub fitting for a lead-caulked joint in vertical positions

Single or double tee branch

Side inlet quarter bend

Double hub sanitary tapped tee on vertical lines as a fixture connection

#29. According to Section 304, what must be connected properly to the drainage systems of the building and premises?

Only plumbing fixtures

Only drains

Only appliances

All plumbing fixtures, drains, appurtenances, and appliances used to receive or discharge liquid wastes or sewage

Results

#1. Plug valve

#2. Gas cock, gas stop

#3. Ball valve

#4. HAWK HEAVY DUTY SELF-ADJUSTMENT PIPE WRENCH

#5. RACHET CUTTER

#6. Which section of the plumbing code discusses the proper connections required for plumbing fixtures, drains, appurtenances, and appliances used to receive or discharge liquid wastes or sewage?

#7. What is the minimum distance required between a water closet or bidet and any side wall or obstruction?

#8. According to Section 309, what is the main requirement for the location of piping, fixtures, or equipment?

#9. Check valve

#10. According to Section 310.2, what is the penalty for concealing cracks, holes, or other imperfections in materials?

#11. Which fixtures require approved strainers according to Section 404?

#12. What is the requirement for overflow outlets in fixtures?

#13. What is the minimum dimension required for an access panel or utility providing access to concealed slip joint connections according to Section 404?

#14. According to Section 307, how should wastes detrimental to the public sewer system be disposed of?

#15. What is required for every building where plumbing fixtures are installed according to Section 305?

#16. What is the purpose of Section 406.1?

#17. Globe valve

#18. According to Section 306, what is unlawful to deposit into any plumbing fixture, floor drain, interceptor, sump, receptacle, or device connected to the excreta and storm drainage systems, public sewer, private sewer, septic tank, or cesspool?

#19. Which material can be used for exposed or accessible connections of continuous waste and fixture tailpiece according to Section 404?

#20. Which fixtures are prohibited according to Section 405?

#21. WIDE ROLL PIPE CUTTER

#22. What material can be used for tailpiece, continuous waste, or waste and overflow when they are exposed or accessible?

#23. What type of water closet bowls should be used for public use?

#24. What is the main restriction on the location of excreta plumbing, building sewer, and other facilities according to Section 308.1?

#25. What type of water closets shall be prohibited?

#26. CROWFOOT’S WRENCH

#27. According to Section 301 of the plumbing code, which of the following is true?

#28. According to Section 311.1, which of the following fittings is not allowed as a drainage fitting?

#29. According to Section 304, what must be connected properly to the drainage systems of the building and premises?

#30. SINGLE ENDED JAW CHAIN TONGS

PREMIUM WEEKLY LONG QUIZ: ONLINE SELF-REVIEW PROGRAM

Results

#1. Plug valve

#2. Gas cock, gas stop

#3. Ball valve

#4. HAWK HEAVY DUTY SELF-ADJUSTMENT PIPE WRENCH

#5. RACHET CUTTER

#6. Which section of the plumbing code discusses the proper connections required for plumbing fixtures, drains, appurtenances, and appliances used to receive or discharge liquid wastes or sewage?

#7. What is the minimum distance required between a water closet or bidet and any side wall or obstruction?

#8. According to Section 309, what is the main requirement for the location of piping, fixtures, or equipment?

#9. Check valve

#10. According to Section 310.2, what is the penalty for concealing cracks, holes, or other imperfections in materials?

#11. Which fixtures require approved strainers according to Section 404?

#12. What is the requirement for overflow outlets in fixtures?

#13. What is the minimum dimension required for an access panel or utility providing access to concealed slip joint connections according to Section 404?

#14. According to Section 307, how should wastes detrimental to the public sewer system be disposed of?

#15. What is required for every building where plumbing fixtures are installed according to Section 305?

#16. What is the purpose of Section 406.1?

#17. Globe valve

#18. According to Section 306, what is unlawful to deposit into any plumbing fixture, floor drain, interceptor, sump, receptacle, or device connected to the excreta and storm drainage systems, public sewer, private sewer, septic tank, or cesspool?

#19. Which material can be used for exposed or accessible connections of continuous waste and fixture tailpiece according to Section 404?

#20. Which fixtures are prohibited according to Section 405?

#21. WIDE ROLL PIPE CUTTER

#22. What material can be used for tailpiece, continuous waste, or waste and overflow when they are exposed or accessible?

#23. What type of water closet bowls should be used for public use?

#24. What is the main restriction on the location of excreta plumbing, building sewer, and other facilities according to Section 308.1?

#25. What type of water closets shall be prohibited?

#26. CROWFOOT’S WRENCH

#27. According to Section 301 of the plumbing code, which of the following is true?

#28. According to Section 311.1, which of the following fittings is not allowed as a drainage fitting?

#29. According to Section 304, what must be connected properly to the drainage systems of the building and premises?

#30. SINGLE ENDED JAW CHAIN TONGS

Shopping Cart

Add A Coupon

Estimate Shipping

Search our site